In recent years, with the sharp rise of copper prices and the instability of the current state, many customers have been greatly challenged by material costs. As a result, the development of enameled aluminum wire has been accelerated, which has attracted more and more attention.
Enameled aluminum wire has been widely used in South Korea and other Europe, the United States and Asia. In the 1990s, European and American countries widely used aluminum enameled wires. Before China had difficulty recovering copper resources in the 1970s, they used aluminum enameled wires in the fields of cables, power transformers, and motors. From this point of view, the use of aluminum enameled wire should be no problem, but it has abundant copper resources, and the price of copper and aluminum is not much different. People began to use round Round Enameled Aluminum Wire and achieved rapid development in a short period of time. However, with the fluctuation of copper prices and cost pressures, aluminum has surfaced and developed rapidly.
When it comes to using aluminum instead of copper, some customers will encounter the concept that using aluminum instead of copper is the opposite technology. In fact, this is incorrect. Enameled aluminum wire has been used in Europe and the United States, and the International Electrotechnical Commission (IEC) and other international standards bodies have also formulated corresponding technical standards for enameled aluminum wire (IEC60317-0-3, IEC60317). -25, NEMA-1000, etc.) also show that the use of enameled aluminum wire is technically mature. Therefore, some customers do not have to worry about using enameled aluminum wire. However, we must also correctly understand the use of enameled aluminum wire, which is different from copper enameled wire, especially its welding problem, which does plague many customers. This also limited the development and use of enameled aluminum wire, but after unremitting efforts, the problem was solved by different customers. Some customers use crimping and riveting, some use flux welding, and some use argon arc welding. Take different methods according to different products. In short, we will develop a good welding solution. With the further deepening of understanding of enameled aluminum wire, better application of technology, the trend of replacing copper enameled wire with aluminum has been irreversible and will be further expanded. As long as the design is reasonable and used correctly, the use of aluminum will be more extensive.
