What is medium plate ceramic tile
Medium plate, usually refers to the thickness of the product is about 8.3-8.5mm, between the thin plate and conventional products; the specification is 300 × 600mm or 400 × 800mm.
Reasons for the strong rise of ceramic medium plate
Although the antifouling performance of ceramic glazed tiles is incomparable, the "merits" and "merits" cannot be overstepped. Floor tiles on the wall, too heavy, poor antifouling, high cost, wear resistance and anti-skid significance. In fact, the cost of thin plate is very high. The medium plate is just as the name suggests, which is the golden mean.
- Consumers need low water absorption products to replace ceramic wall tiles
For a long time, the kitchen and bathroom walls of home decoration are occupied by porcelain tiles. However, due to the basic characteristics of high water absorption, porcelain tiles have the disadvantages of insufficient compactness and low flexural strength.
Medium plate products have high degree of porcelain, high flatness, high flexural strength and other advantages. The whole marble all ceramic medium plate is relatively light (about 8.3-8.5mm thick), which is more conducive to wall paving.
- The medium plate has the whole body craft and more aesthetic feeling
The upgrading of ceramic equipment and the gradual maturity of production technology provide conditions for the production enterprises to transform the medium plate. At present, the medium plate has the marble tile technology, and its texture is lifelike, three-dimensional and vivid, which restores the texture of natural marble, and is favored by many consumers.
- The construction of the middle plate is convenient, and can be matched with the wall and the floor
The middle plate has the gold specification that meets the wall, such as 400 * 800, 300 * 600. Such a specification does not need to be cut, and can be used on the wall to lay the ground, which fully shows the space integrity and is convenient for construction.
The difference between the wall tiles in the middle plate and the traditional tiles
- Water absorption
The wall tiles in the middle plate belong to ceramic tiles, and the water absorption rate is very low, which is controlled in the double zero standard. However, the traditional tiles belong to ceramic tiles, and the water absorption rate is generally high, generally 10% - 12%.
- Brick density
The results show that the glazed degree, density and damage resistance of the brick body are higher. Traditional porcelain is ceramic body, high water absorption, low brick density is the remarkable characteristics of traditional porcelain, at the same time, the traditional porcelain damage strength is relatively low.
- Wear resistance
The results show that the surface wear resistance of the inner wall tiles of the medium plate is higher than that of the traditional tiles, because the density of the inner wall tiles of the medium plate is high and the water absorption rate is low, while the density of the traditional tiles is low and the water absorption rate is high, so the wear resistance of the traditional tiles is lower than that of the inner wall tiles of the medium plate.
- Application
The middle plate can be laid on the ground, but the traditional tiles can't. moreover, the middle plate is a glazing technology, which can completely achieve the effect of wall and ground integration with the floor tiles. The 800 × 800mm brick has low water absorption and needs to be processed on the wall; the surface of the thin plate is limited to the plane, so it can’t be used for special-shaped abrasive tools, chamfering and other processes; the water absorption of the porcelain is high, which inevitably has limitations. From the point of view of all kinds of wall processing, it is convenient for consumers to use it directly.
